BRD 4JJ1 High Mount Turbo Exhaust Manifold - Isuzu D-Max, Holden Colorado & Rodeo 3.0L
Description
There is a point in a 4JJ1 build where the factory manifold simply runs out of room. Go to an F55 or anything larger and the turbo fouls the block - it is not a flow problem at that stage, it is a physical one.
This high mount manifold solves it. It lifts the turbo clear of the block and puts a proper upgrade flange where the factory casting never had one, so the turbo you want actually fits and breathes.
Why high mount
Raising the turbo buys clearance and lets the runners flow into it without the tight factory bends. On a 4JJ1 running a 44mm or 55mm compressor, that is the difference between a turbo that fits on paper and one that fits in the engine bay.
Specifications
- High mount tubular design
- Flanged for 44mm and 55mm turbo upgrades
- Required for F55 and larger turbos, where the factory manifold has no block clearance
- Built by BRD in Thailand
Fitment
Isuzu and Holden 4JJ1 3.0L turbo diesel:
- Isuzu D-Max RC, 2008 to 2012 - early and late, LWB and SWB, auto and manual
- Isuzu D-Max RT, 2012 to 2016 pre-DPF and 2016 to 2020 DPF, auto and manual
- Holden Colorado RC, 2008 to 2012 - early and late, LWB and SWB, auto and manual
- Holden Rodeo RA7, 2007 to 2008, LWB and SWB, auto and manual
Worth knowing
From 2012 the factory manifold changed, and fitting an aftermarket turbo to it meant drilling. This manifold is the clean answer to that.
Manifold only - turbo, studs, nuts and gaskets are separate. If your vehicle is not on the list above, call us before you order rather than after.
Supplied and backed by GTurbo.
| Weight | 10 kg |
| Dimensions | 30 x 27 x 22 cm |
| Brand | BRD |
Related Products